Instructions for use
Walking aids are used for two purposes: as part of a rehabilitation program when the user is recovering from an injury or operation and as a long-term mobility aid when the user has permanent difficulty walking. These devices help maintain balance, aid in the prevention of injuries (particularly falls), and allow the person to attend to their errands independently. Mobility aids can be used indoors or outdoors, depending on the model. Mobility aids are used to change weight redistribution: some of the weight carried through the legs when walking is transferred through the arms by the frame or cane depending on how it is placed for support. Products equipped with a seat allow the user a short rest.
Height adjustment: remove the clip from the tubes using both thumbs. Slide the inner tube to the adjustment hole at the desired height, then lock again with the clip. The clip must pass through both sides of the tubes. The crutch is equipped with 2 adjustment holes positioned on the external tube and 5 holes positioned on the internal tube, so as to obtain 10 different adjustment positions. The adjustment range of the crutch is 2cm.
Keep the crutch close to your body while walking to avoid falls.

Warnings
- Always refer to the authorized dealer for device adjustments and to learn how to use it correctly.
- Do not store the device outdoors and do not leave it exposed to sunlight. (Warning: do not leave the device inside a vehicle exposed to full sunlight).
- Do not use in case of extreme temperatures (above 38°C/100°C or below 0°C/32°CF).
- Carefully check all the components of the device (screws, tubes, tips, handles).
- Regularly check that all components are secured (clips, tubes, tips, handles).
- Hold the handle firmly when using the device.
- In the event of a fall, release your grip on the device by moving it away from your body, so as not to fall on it.
- Always move forward slowly and with short steps to ensure good distribution of your weight and to avoid losing balance.
- Do not use the device on wet or icy surfaces (in case of snow, ice, rain c).
- Do not use the device on stairs; risk of accidents.
- Use the device only as a mobility aid and in the correct manner.
- Always respect the maximum weight limit shown on the device label.
- The device must not be modified in any way. Use only original spare parts to replace damaged or damaged parts. The replacement must be carried out by technical personnel.
- After assembly, make sure that the device is locked in the OPEN position and that it is in a stable position on the ground before use.
- Always check that the device and its components are locked and tightened correctly and securely before use.
- Do not hang any objects on the device.
- If the device is not used for a long period of time, it is necessary for technical personnel to carry out a check before use.
- During use, pay maximum attention to holes or deformations in the ground.
- The suction cup must not be excessively worn. If the suction cup shows signs of excessive wear, please ask