Description
Personal Protective Equipment for the protection against particulate pollutants in the form of solid aerosols, airborne solids on aqueous base and liquid aerosols.
Designed to provide the user with respiratory protection.
Non sterile and single use product.
Filtration> 99%.
Complies with EN 149: 2001 + A1: 2009.

How to use
Open the outer wrapping and thoroughly disinfect your hands. Check that the bands are in good condition and are in perfect working order. Check that the nose clip and sponge are not damaged.
Open the mask with two hands, holding it by the side flaps where the rubber bands are welded.
Check that the sponge is correctly applied to the height of the nose clamp, from the inside.
Adhere the mask to the face in such a way as to cover the nose, mouth and chin. Holding the mask in place on the face with one hand, place the upper to lower straps behind the head with the other hand. Adjust the length of the rubber bands, if necessary, through a knot. Press the nose clip with both hands, shaping it until it adheres completely to the nose.
After wearing the mask on your face, make sure it fits snugly and does not leak. If the product should show leaks, it will always be possible to adjust it with the underwire nose clip and the elastic knots.

Components
• PP spunbond TNT;
• PP meltblown TNT;
• Elastic: nylon;
• Sealing sponge: polyurethane;
• Nose clip underwire: aluminum coated with plastic material.

Warnings
For adults only.
Do not use if package is open or damaged.
Do not wash.
If the mask is damaged, dirty or if breathing is difficult, discard the product and replace it with a new one.
The product must be used according to the manufacturer's instructions.
For correct operation, the product must be worn on a face without a beard, mustache or external objects. Otherwise it would be unlikely to meet the leakage requirements.
As far as possible, do not touch the inside of the bezel.
In case of respiratory failure or other pathologies (anxiety, depression, claustrophobia, etc.), consult your doctor before use.
Please note that any PPE of the respiratory tract can reduce the communication capacity.
The mask must not be used for more than one work shift (max 6-8 hours).
Do not use the mask in polluted environments and / or with an oxygen concentration lower than 18%.
Any use other than what is indicated in the instructions for use is prohibited.
Do not use in an explosive atmosphere.

storage
Store in a cool, dry and clean place, away from flames or heat sources.
Validity for intact packaging: 60 months.

Format
1 piece

Code AGL-MTB 3