Description
FFP2 model filtering facial protective mask, soft and comfortable, odourless, with adjustable internal nose pad and ear elastics that guarantee correct positioning. Device that can be used to protect public health, it provides a minimum protection of 95% against particles smaller than 0.3 microns thanks to the 5-layer structure.

Instructions for use
Open the mask on both hands (resting them on the outside of the mask).
Place the mask on your face, making the nose clip adhere.
Fasten the elastic straps behind your ears and check that it is secure.
Fit the nose clip to your nose.
Check that the mask adheres well to the face on all sides:
- to check the fit, place both hands on the mask and inhale vigorously; you should feel a negative pressure;
- if you feel air entering the edges of the mask from the area around the nose, check for any non-adhesions and adjust the nose clip;
- if air enters from other edges of the mask, check the adhesion, adjust each side and secure the laces better.
Change your mask immediately if you cannot breathe or if the mask becomes damaged. Change the mask if it does not fit properly.
It is important to observe the instructions given here to ensure correct and safe use of the mask.

Components
First external layer: Spunbond 50 g/m ²
Second internal layer: Meltblown 25 g/m ²
Third internal layer: Spunbond 30 g/m ²
Fourth layer: Meltblown 25 g/m ²
Fifth internal layer (in contact with the face): Spunbond 30 g/m ²

storage
Store away from light.
Validity with intact packaging: 60 months.

Format
1 piece bag.

Code AYC101