-
-87%
BACKHOME SUPER MINI TRANSP NAC
4.91€
38.00€
- Brand: VIRBAC Srl
- Product Code: 983681572
- EAN: 3597133094718
- Availability: Out Of Stock
- Purchase 3 items for 4.81€ each
- Purchase 4 items for 4.71€ each
- Purchase 5 items for 4.62€ each
BackHome
Super Mini Transponder
Description
Electronic identification.
For veterinary use only.
Back Home microchips adhere to the international standard ISO 11784 (FDX-B). The microchip code consists of 15 digits.
The implanter is preloaded with the transponder. The "no-return" click system acts as an additional safety measure. This system ensures that the transponder is not aspirated back into the implanter before the implanter is removed from the implant site.
The new BackHome implanter helps the environment by allowing the separate recycling of the needle in the appropriate "sharps" type medical container and the implanter body in a container for plastic materials.
The database is accessible from the internet or by telephone. Provides qualified users with access to the pet owner's contact information if their pet is found.
10 registration forms are included. The module allows the registration of the newly implanted animal on the database. Return envelopes can be included (availability varies by country).
Barcode stickers. The microchip code is shown on 6 stickers with the corresponding barcode. Attach barcode labels to registration forms (whether attached varies by country), vaccination certificates or any other administrative documents.
Instructions for use
Make sure the animal has not already been implanted using a BackHome scanner. Check the integrity of the sterile bag. Before opening the sterile envelope, read the transponder that is to be implanted. Check that the code number matches the one printed on the barcode labels included in the sterile pouch. The transponder is contained inside the implanter needle. Open the sterile bag and remove the plastic cap that protects the needle. Identify the correct implantation site. Always apply regular aseptic precautions. Create a fold of skin at the point where pressure will be applied on the piston to completely eject the transponder. The snap non-return system ensures that the transponder is not sucked into the needle after implantation. Scan the newly implanted transponder. Replace the plastic needle cap and safely dispose of the used implanter.
storage
Store below 30°C (room temperature).
Validity with intact packaging: 60 months.
Format
10 pieces + 6 transponder barcodes.
Code 309471
Electronic identification.
For veterinary use only.
Back Home microchips adhere to the international standard ISO 11784 (FDX-B). The microchip code consists of 15 digits.
The implanter is preloaded with the transponder. The "no-return" click system acts as an additional safety measure. This system ensures that the transponder is not aspirated back into the implanter before the implanter is removed from the implant site.
The new BackHome implanter helps the environment by allowing the separate recycling of the needle in the appropriate "sharps" type medical container and the implanter body in a container for plastic materials.
The database is accessible from the internet or by telephone. Provides qualified users with access to the pet owner's contact information if their pet is found.
10 registration forms are included. The module allows the registration of the newly implanted animal on the database. Return envelopes can be included (availability varies by country).
Barcode stickers. The microchip code is shown on 6 stickers with the corresponding barcode. Attach barcode labels to registration forms (whether attached varies by country), vaccination certificates or any other administrative documents.
Instructions for use
Make sure the animal has not already been implanted using a BackHome scanner. Check the integrity of the sterile bag. Before opening the sterile envelope, read the transponder that is to be implanted. Check that the code number matches the one printed on the barcode labels included in the sterile pouch. The transponder is contained inside the implanter needle. Open the sterile bag and remove the plastic cap that protects the needle. Identify the correct implantation site. Always apply regular aseptic precautions. Create a fold of skin at the point where pressure will be applied on the piston to completely eject the transponder. The snap non-return system ensures that the transponder is not sucked into the needle after implantation. Scan the newly implanted transponder. Replace the plastic needle cap and safely dispose of the used implanter.
storage
Store below 30°C (room temperature).
Validity with intact packaging: 60 months.
Format
10 pieces + 6 transponder barcodes.
Code 309471