100% Farvisan Polypropylene Coat 1 Piece

100% Farvisan Polypropylene Gown - In TnT

Category 1 Personal Protective Equipment (OPI). It is very light and comfortable.

It complies with the European technical standard EN 13688: 2013 and complies with the EU / 2016/425 Regulation. The gown is disposable, not reusable, made with a simple design and intended to protect the user by containing and filtering dirt particles present in the environment. The MAC-III-FC model, not being sterile, should not be used in operating theaters or other such applications.

MAC-III-FC gowns They consist of 1 layer of "spunbonded" polypropylene of 30 g / m2. There are no glass fibers.

Body : in a single rectangular piece suitably shaped at the neck, armholes and shoulders. The shoulders are assembled by stitching. Back closure for overlap with belt and neck strap. The upper edge of the gown is finished with a 1 cm high profile left free at the ends (total profile length approximately 150 cm); the ends of the profile are left free to allow the user to fasten the garment by "tying" around the neck. This profile is obtained by folding on itself a section of the same material of which the body is made.

Sleeves : made in a single trapezoidal-shaped piece closed on itself to form a cone assembled by stitching performed at the top in continuation of the shoulder assembly seam. Each sleeve is assembled to the body by stitching and is finished with approximately 7 mm high elastic applied to the bottom, along the free side (approximate circumference of the cuffs with elastic at rest 18cm).

Belt : an additional profile about 158 cm long and having the same characteristics as the one indicated above, is applied at the left side by means of a 4 cm long seam performed about 23 cm from the base of the armhole to allow the user to fasten the garment by "knotting" around the waist.
The device provides the expected performance according to the prescribed design indications and is made in such a way that, under normal conditions of use, it is suitable for its intended use, being safe and effective. It does not compromise the safety and health of users and other people, it being understood that any risks associated with its use are acceptable, considering the expected benefits, and compatible with the generally recognized state of the art, without compromising the risk-benefit ratio.

Composition

100% polypropylene.

Warnings

Carry out the operations of applying and removing the device correctly. Highlight and report any incidents related to the device. The disposal of the used device must be carried out in accordance with the regulations in force and in an appropriate way to avoid inadvertent contact by other people.

storage

Store in a dry place, possibly inside its packaging. Do not expose to the sun and heat sources. Avoid storage in dusty places.

Format

Pack of 1 gown.