Connettivina Patch Hi Tech 6x7cm Fidia 5 Pieces

Connettivina Patch Hi Tech Fidia - Medical Device

Connettivina Patch Hi Tech what it is for

How Connettivina Patch Hi Tech works

How to use for Connettivina Patch Hi Tech

Frequency of application for Connettivina Patch Hi Tech

Components contained in Connettivina Patch Hi Tech

Warnings for Connettivina Patch Hi Tech

Correct storage of Connettivina Patch Hi Tech

Format

Connettivina Patch Hi Tech what it is for

Connettivina patch Hi Tech is a medical device for cutaneous use consisting of a transparent adhesive edge in polyurethane and a central absorbent multilayer pad soaked in a solution of hyaluronic acid sodium salt at 0.3%.

How Connettivina Patch Hi Tech works

The dressing was developed to ensure high comfort

• It is conformable and has rounded edges;
• Allows skin transpiration;
• It is impermeable to water;
• It is water resistant.
• The central pad also has a non-stick layer for painless and trauma-free removal.

Connettivina patch Hi Tech is able to create a humid environment in the application site, protected towards the outside, such as to favor the natural tissue repair process in case of bruises, abrasions, small cuts, superficial wounds, burns .
The imbibition solution does not contain parabens or other preservatives.

How to use for Connettivina Patch Hi Tech

Before application clean and dry the affected area carefully, disinfect if necessary.

• Grasp the two flaps of the foil pouch containing the adhesive dressing, pull them to open the package and remove the dressing. The dressing consists of an adhesive side A (blue) and an outer side B (white).
• First, gently remove the two edges of the blue protection from the adhesive side A of the dressing and apply to the wound, making sure that the soaked pad is centered on the area of interest.
• Press and unfold the dressing carefully to allow for proper adhesion, avoiding creases.
• Once adhered, gently remove the two flaps of the white protective paper from the outer side B, pulling them along the separation line, from the center towards the edges.

Frequency of application for Connettivina Patch Hi Tech

It is recommended to apply on the injured skin area every 48 hours, until complete resolution, for no more than 30 consecutive days.

Components contained in Connettivina Patch Hi Tech

Imbibition solution: hyaluronic acid sodium salt 0.3% (main component), glycerol, propanediol, phenethyl alcohol, ethylhexyl glycerin, lactic acid, purified water.
Support : polyurethane, polystyrene, polyethylene, viscose, polyester, polypropylene, polyacrylic adhesive.

Warnings for Connettivina Patch Hi Tech

For cutaneous use only. Do not use at the same time products based on quaternary ammonium salts (such as benzalkonium chloride) which can alter the product. Do not use the product if the package is opened or damaged. Do not use the product after the expiry date shown on the package. The expiry date refers to the product properly stored in its original packaging. Each adhesive dressing is for single use only, meaning it should only be used once by a single patient and discarded after use. If reused, Fidia Farmaceutici cannot be held responsible for the performance, functionality and hygienic conditions of the product. After use, do not dispose of in the environment and dispose of according to the national regulations in force. Avoid contact with eyes. In case of contact with eyes, rinse with water. Keep out of the reach and sight of children. The product has not been tested in pregnant, lactating women and children.
Contraindications: ascertained individual hypersensitivity to the components of the product.
Undesirable effects: there are no known adverse reactions with hyaluronic acid-based products.

Correct storage of Connettivina Patch Hi Tech

It is recommended to store in the original packaging at a temperature between 2 ° C and 25 ° C. Do not freeze.

Format

Connettivina Patch Hi Tech is sold in packs of 5 pieces, measuring 6 x 7 cm.

Back to the index of Connettivina Patch Hi Tech Fidia