Description
Filtering half mask type FFP2 NR.
Assorted in 7 different colors: blue, burgundy, green, khaki, grey, black and white.
Not sterile.
Standard EN 149:2001+A1:2009.

How to use
With the nose clip facing up, cover your mouth and nose with the mask. Pull the ear loops to wrap around your ears and adjust the position as comfortable as possible. Press the nose clip to fit the bridge of the nose and prevent leakage.
Check if there is air escaping from the nose clip or other parts during exhalation. If yes, readjust the position of the mask.

Components
TNT Non-woven fabrics, filter layers, nose clips and ear loops.

Warnings
Non-reusable particulate device.
The mask is intended for personal protection only. It is not a medical face mask.
Do not use the filtering face mask to enter or remain in a contaminated area under the following circumstances:
- in atmospheres containing less than 19.5% oxygen;
- the contaminants or their concentrations are unknown or are seriously dangerous to life or health;
- in explosive atmospheres.
Do not modify or misuse the face filter mask.
Do not use the Facial Filter Mask with a beard or any other condition that may prevent a good seal. The requirements for the seal will not be met.
The face filter mask must not be used for more than one work shift.
Persons allergic to polypropylene should not use this mask.
Please check the integrity and validity of the packaging before use. If the packaging is damaged, do not use it.
Proper selection, training, use and maintenance are essential for a full face filter mask to help protect the wearer from certain airborne contaminants.
This product is disposable. Contaminated products must be disposed of as hazardous waste in accordance with national regulations. Don't throw it away.
When removing the filtering facemask, avoid touching its external surface, remove the ear loops and properly dispose of the used filtering facemask.
Check before use:
- Cover the front of the filtering facemask with both hands, being careful not to hinder the fit of the mask.
- For the mask without a valve - exhale sharply.
- If air leaks around the nose, readjust the nose clip to eliminate the leak. Repeat the attitude check.
- In the event of air leaks at the edges of the mask, adjust the elastic bands along the sides of the head to eliminate the leaks. Repeat the attitude check.
If a proper fit cannot be obtained, do not enter the hazardous area and replace with a new mask.
The seal requirements are unlikely to be met if the beard passes under the face seal.

storage
Store at a temperature between -20°C and +40°C and relative humidity lower than 80%.
Validity with intact packaging: 2 years.

Format
Pack of 10 pieces.
Contains 2 blue faceplates, 1 burgundy faceplate, 1 green faceplate, 1 khaki faceplate,1 gray faceplate, 3 black faceplates, and 1 white faceplate.

Code FAGO S 101-BA