FILTER HALF MASK FFP2 25 Pieces

Safetyslife FFP2 Mask

FFP2 filter mask in filter material, preconformed, with 5 layers.
Adjustable nose clip.
White color in non-woven fabric with elastic laces.
Indicated for the protection of the respiratory tract from dust (including toxic ones), non-greasy mists and metal or plastic fumes.
It is personal and non-transferable.
Personal protective equipment.
Latex free.

Warnings

Disposable mask, do not reuse.
This respirator must not be used for respiratory protection against asbestos (asbestos), sand jets, gases or in atmospheres containing oily mists.
It must not be used against highly toxic powders, i.e. with a tolerance limit lower than 0.05 mg / m ³ .
As it is a filter material and does not provide oxygen, it should not be used indoors and without ventilation such as: chambers, tanks, silos and pipes or where the oxygen concentration can be less than 19.5% by volume.
Do not use when the contaminant concentration exceeds the values of IPVS (Immediately dangerous to life and health) or is greater than 10 times the value of the tolerance limit.
The product must not be altered or modified for use.
It should not be used by people with beards or deep scars on the face as this prevents an effective seal of the respirator on the user's face.
Leave the area immediately if:
• breathing becomes difficult;
• the product is damaged;
• you experience any kind of irritation or you have dizziness, nausea or pain in the head (this could mean that the respirator is full or unsealed on the face).
If irritation or breathing problems occur, discontinue use and consult a physician.
Change the mask whenever it is saturated (clogged), punctured, torn or with loose or broken elastic, or when the user smells or tastes the contaminant.

storage

Keep in a place with good ventilation, clean, dry, avoiding humidity and exposure to contaminants.
Validity for intact packaging: 4 years.

Format

Pack of 1 piece and 25 pieces
Cod. ZB008