Fingertip X004C Kit

Fingertip X004C Finger Pulse Oximeter

This finger oximeter is a medical sensing device with non-invasive and continuous features for detecting blood oxygen saturation (SpO2) and blood pressure (PR). It is portable and allows you to measure SpO2 and PR values quickly and accurately. This product is suitable for personal use, in the home and in medical facilities. It is suitable for use in patients aged 15 to 60 years. This product is not suitable for prolonged use.

Main features

• OLED color display, oxygen volume figure and graph displayed together on the interface;
• Manually adjust the direction of the display interface, according to the observation needs of the patient;
• Acoustic alarm function;
• Low energy consumption, 20 hours of continuous operation;
• Low perfusion ≥0.6%;
• Low voltage indicator;
• Automatic shutdown if inactive for 8 seconds;
• Small and light, convenient to carry;
• Through the menu it is possible to set the limit values for the oxygen alarm, the upper and lower limits of PR, activate or deactivate the alarm, activate or deactivate the acoustic signals.

How to use

• Install two AAA batteries in the battery compartment with correct polarity and cover.
• Insert a finger into the rubber clamp of the oximeter (it is recommended to insert it all the way) with the fingernail facing up, then close the clamp.
• Press the button on the front panel once.
• Keep your finger steady during measurement. Do not perform measurement on the go.
• Read the data on the screen.
• Note: Clean the finger and the rubber surface in contact with the finger using medical alcohol before and after each test. The rubber used in the oximeter clamp is hypoallergenic and of medical quality and contains no toxins and is in no way harmful to human skin. When the finger is inserted into the oximeter, the surface of the nail should be facing up. Disposable batteries should be removed if they have been unused for a long time.

Repair and maintenance

• Perform periodic inspection to make sure there is no obvious damage affecting the safety and performance of the device.
• Make sure that in operating conditions you are not in the vicinity of flammable substances, temperatures that are too high or too low, humidity levels that are too high or low.
• Turn off the device when it is wet or damaged.
• When the battery charge light is red, replace the batteries immediately.
• Clean the screen before performing detection.
• Please remove the batteries when the device is not used for an extended period of time.
• Dispose of the battery according to local regulations.
• If there is dust or dirt on the surface, the oximeter can be cleaned with 75% alcohol solution. Please use a dry fabric with little alcohol to prevent alcohol from getting into the device.

Warnings

Notice: The maximum time for applying a pulse oximeter probe to a single site is 4 hours.
Misapplication of a pulse oximeter probe with excessive pressure for prolonged periods can cause pressure injury.

Some factors that can cause SpO2 to deviate include

• Strong ambient light (photodynamic therapy);
• Movement of the patient;
• Simultaneous execution of other diagnostic tests;
• Low perfusion; electromagnetic interference;
• Proximity of HF surgical equipment;
• Dysfunctional hemoglobin.

storage

Store at temperature between -20 ° C and 55 ° C, humidity between 10% ~ 93%.

Format

Packaging with complete kit.