IPAD CU-SP1

Class IIb Medical Device.
Defibrillator with automatic volume adjustment, Cu-Sp1 is able to automatically adjust its volume proportionally to the noises emitted in the surrounding environment. Cu-Sp1 is equipped with pre-connected paddles housed in a special compartment located under the defibrillator. This gives the certainty that the defibrillator is ready for use in the shortest possible time. The device is also equipped with an exclusive technology capable of carrying out precise control on the life status of the pads themselves. The front part of the defibrillator, in fact, houses a light indicator that changes color both 3 months before the pads expire and when the pads have expired. This punctual indication will allow the replenishment of new plates in good time.
The CU-SP1 iPad defibrillator is able to detect whether or not the CPR maneuver has been performed. If it has not yet been carried out, invite the operator to proceed; otherwise, encourage the operator to continue, guiding him through the operation.
To download information from the iPad Cu-Sp1 defibrillator, after an event simply install the CU-EX1 software on a computer to be able to view and analyze the use that has been made of the defibrillator. Information such as ignition time, the patient's heart rate and the shocks applied are all clearly presented. Furthermore, the device can store up to 5 events on an SD memory card with a maximum of 3 hours of ECG analysis.
Available in 16 languages.

Technical features
- Defibrillator
• Mode: Semi-automatic
• Waveform: Biphasic truncated exponential
• Energy: 150J fixed
• Adult: Rated 150J into a 50 ohm impedance
• Child/Child: 50J nominal at 50 ohms
• Charge Control: Controlled by automatic patient analysis system
• Charging time: <10 seconds from discharge warning
• Waterproof: Protection against water jets IPX5 per IEC60529(IP55)
• IP5X dust protection per IEC60529
- User interface
• User support: Detailed voice prompts and flashing lights
• CPR Guide: Detailed messages indicate actions to take for adults and children
• Controls: On/off button, i-button discharge button
• Indicators: LCD display (device status, battery status, electrode status)
• Sensors: Electrode expiry date, electrode connection status
• Cpr monitoring
• Automatic volume adjustment
- Data recording and transmission
• IrDA port: Wireless data transmission to PC, SD card
• Internal memory (nand-flash): ecg, events
• Storage capacity: Multi recordings 5 ​​events/max. 3 hours
• PC data review program: CU-EX1
- Patient analysis system
• Patient analysis system: ECG rhythm - ventricular fibrillation, tachycardia
• Sensitivity/specificity: Conforms to AAMI DF80 guidelines
• High capacity non-rechargeable battery
• Standard Type: DC 12 Volt 4.2 Ah, LiMnO2
• Capacity: minimum 200 shocks (150 J)

Format
The package contains: standard electrodes, a carrying bag, an allithium battery pack and a manual.

Code 35340