Innoliving Protective Visor

Innoliving Protective Visor - Safety Device

The INMD-013 protective visor was designed as a safety shield to protect the face and eyes. It is unisex and is made with a clear border to offer a wide viewing angle. It has an anti-fog coating on both sides, to keep visibility always sharp and clear. Made of PET material with an enveloping design, it ensures excellent coverage. It is easy to put on and stays in place thanks to the elastic band on the back and the soft and delicate 3 cm latex sponge on the forehead.

PROTECTION CATEGORY

According to the 2016/425 Regulation of Personal Protective Equipment, the INMD-013 protective visor is classified as category I PPE, for protection against minor risks. This visor complies with the requirements of Regulation (EU) 2016/425 relating to PPE and meets the requirements of the harmonized technical standards EN 166: 2001 and EN 168: 2001.

INTENDED USE

For civil protection against minor risks. Within the limits established by law, the product can be used in activities such as laboratory work, woodworking, mowing, gardening, drilling, sanding, outdoor sports, by sales staff in shops and supermarkets, cooking (catering / nursing homes), warehouses.

STORAGE

Store the unused hygienic protective visor in its unopened package, in a dry place away from direct heat sources at a temperature between -20 ° C and 30 ° C; humidity must be <80%.

DISPOSAL

Disposable protective visor. For the used / broken / polluted face shield, it is recommended to sterilize it with alcohol before throwing it in the special waste contents.

WARNINGS

Read the instructions for use before use. Before use, check that the package is intact. Before use, remove the clear plastic film and carefully examine the clear surface for any signs of damage. Should the visor
protective cover is not intact, please contact the manufacturer for product replacement.
Carefully follow the instructions on how to wear the visor and pay particular attention to the warnings before use. Do not use this face shield when concentrations of contaminants are immediately dangerous to health. Leave the contaminated area immediately in case of difficulty in breathing, dizziness or other discomfort.
Remove, dispose of and replace the protective visor in case of damage. Do not alter, modify or use this protective visor for uses other than those required by law for this product category. For added protection, we recommend wearing a filter mask over the nose and mouth.

FORMAT

Pack of 1 visor.