Description
Intra Repiderma is based on chelated copper and zinc.
Unique chelation process causes copper and zinc to be coated in a matrix "shell"
which favors its absorption and penetration into the tissues.
Intra Repiderma is a high pressure powder (exclusive IntraCare patent).
In Intra Repiderma, copper and zinc are in micronized form (<3 microns) to favor rapid and deep penetration into the skin.
Once applied, Intra Repiderma creates a transpiring "patch" between the wound and the environment, protecting it from contamination.
Intra Repiderma is a highly versatile product. It is used on all types of wounds: podal, of the mammary line, various excoriations, umbilical cords, decornifications.
Intra Repiderma is "antibiotic-free": it does not require medical-veterinary prescription.
Intra Repiderma does not require withdrawal periods.
Intra Repiderma does not drip, avoiding useless and costly product losses.
Intra Repiderma is a high pressure powder. The cylinder can also be used upside down without losing product.

Components
Copper Chleate Complex, Copper Chleate Complex, Butane-Propane Blend, Isopropyl Alcohol.

How to use
Shake the can well before use.
Apply Intra Repiderma, keeping the cylinder at a distance of 15-20 cm from the wound.
Direct the jet of the product onto the surface to be treated, until the wound is completely covered with a layer of Intra Repiderma.
A 250 ml bottle of Intra Repiderma is sufficient for 90-100 applications.

Warnings
Keep away from sources of heat, sparks, open flames, heated surfaces. No smoking. Do not spray on open flames or other sources of ignition. Pressurized Container: Do not pierce or burn, even after use. Protect from sunlight. Wear protective goggles. In case of persistent discomfort or eye irritation: consult a doctor. Avoid breathing vapours/spray. Do not eat, drink or smoke while using this product. If in eyes: Flush cautiously with water for several minutes. Remove any contact lenses. Continue rinsing.
Ready forms and explosive mixture of air and vapor at room temperature. The vapor is heavier than air and may travel to remote sources of ignition (e.g. down drains, in basements, etc.).
Cold burns (frost) are the result of skin/eye contact with the liquid product. The jets of liquid or vapor release present the risk of serious damage to the eyes. Abuses involving the intentional inhalation of very high concentrations of vapor, even for short periods, can produce unconsciousness and could prove fatal. Inhalation may cause nose and throat irritation, headache, nausea, vomiting, dizziness and drowsiness. In poorly ventilated or confined spaces, unconsciousness or asphyxiation may occur.

storage
Do not expose to temperatures exceeding 50°C/122°F.
Validity with intact packaging: 36 months.

Format
250ml bottle.

Code 4700250