Description
Type I medical face mask.
Comfortable fit on the face, it fits snugly around the nose, mouth and chin. The mask fits tightly to the sides of the face. Due to its small size, it is suitable for children aged 4/10 years.
They should only be used for patients and other people to reduce the risk of spreading infections, especially in epidemic or pandemic situations.
Type I masks are not intended for use by healthcare professionals in the operating room or in other medical settings with similar requirements.

Legal parameters of TYPE I classification :
• Biological load (bioburden): <30 cfu/g;
• Breathability: <40 Pa/cm ² ;
• Filtering power: ≥95%.

The mask is non-cytotoxic and does not cause skin irritation or allergic reactions.
In the respiratory part, both natural rubber latex and processed natural rubber are absent.
Water repellent and non-sterile.

How to use
Wear the mask correctly, making sure that the upper edge is properly positioned on the bridge of the nose while the lower edge adheres under the chin.

Components
Outer layer: 30 g/m2 polypropylene nonwoven.
Intermediate layer: 30 g/m2 polypropylene nonwoven.
Inner layer: 30 g/m2 polypropylene nonwoven.

Warnings
Do not use if there are holes, tears or seams.
It is essential that the mask is removed, avoiding touching the outside of the mask with your hands.
Sanitize your hands after touching the mask.
Once worn and used, the surgical mask cannot be reused because it is disposable; it is recommended to replace it every 8 hours.

storage
The product must be stored at room temperature between 15°C and 30°C, protected from extreme conditions of humidity, dust, polluting agents, etc.
Validity with intact packaging: 60 months.

Format
Pack of 10 and 50 pieces.

Code
AA01110101 (10 pieces)
AA01120101 (50 pieces)