Mask Ffp2 Matilde 1 Piece

Mask Ffp2 Matilde Personal Protective Equipment

Matilde® is a CE FFP2 certified mask, designed and manufactured in Italy with the use of the best and most certified materials.

As the name suggests, Matilde® was born to be the "Warrior" who will help Italy, and therefore all its citizens, to fight this virus that threatens us, or any other viral form that tries to attack us again.

Matilde® was conceived in Italy, a land of excellence (from the pharmaceutical to biomedical sectors), and for this reason it was created in a "clean room" created especially for her.

To achieve the creation of this excellence in the world of FFP2 masks we have studied and researched the finest non-woven fabric (TNT) materials, having to eliminate more than 3,000 samples before finding the most comfortable shape. In fact Matilde®, in addition to being very safe (filters 94% of impurities in the air), is also the most comfortable mask on the market today.

It is our goal to maintain the VERY HIGH standard, whereby the production of our FFP2 certified mask is controlled in more than 100 steps, with a comprehensive slowdown in production compared to other masks with the same certification.

Matilde® follows the current legislation EN 148: 2001 + A1 2009 and is certified by the International Certifying Body present on the official website

• Facial filtering device.
• Protection against solid (dust) and liquid (mist) particulates in concentrations up to 10 times the TLV.
• Ability to stop non-toxic, harmful or irritating odors.
• Efficiency ≥94%.
• One size.
• Produced and packaged in a clean room.

Composition

High efficiency antiaerosol filter media enclosed by two protective layers plus a comfortable layer;
Ultrasonic welding, ultrasonic welded rubber bands; side in contact with the face in comfortable “Skin Friendly” material;
Nose clip element sewn internally in the mask.

Warnings

The Matilde FFP2 mask must not be used for fire fighting. This type of respirator does not supply oxygen.
Do not use in explosive environments.
Use limited to qualified and properly trained personnel.
The face seal is not obtainable if the respirator is worn by people with a long beard or never shaved.
Do not use these respirators or enter or remain in areas where:
The oxygen concentration is less than 17%;
The contaminants are unknown or of immediate danger to health or safety;
The concentration of contaminants exceeds the limit values prescribed by current laws or the TLV multiplied by the nominal protection factor;
There is the presence of gases and / or vapors in concentrations above the TLV.

Format

Pack with 1 piece.