Description
Low frequency magnetotherapy device, designed and indicated for the treatment, rehabilitation and functional recovery of pathologies affecting:
- wrist, hand, shoulder, foot, ankle and knee joints;
- skeletal musculoskeletal system;
- arthrosis;
- muscular atrophies and dystrophies;
- bunions;
- bruises;
- degeneration of the locomotor system;
- distortions;
- periarthritis;
- benign lesions and muscle tears;
- tendinitis and tendinosis.
Indicated for the treatment and cure of osteoporosis and all pathologies affecting bone tissue. Thanks to the high intensity of the magnetic field it can generate, MAG2000 is particularly suitable for the treatment of bone fractures even in the presence of rigid bandages or plaster casts.
Device intended for both professional users (doctor, therapist, etc.) and home patients. In case of home therapy, the use of the device is recommended exclusively on the advice of the doctor/therapist.
The MAG2000 device is equipped with 35 programs with preset values ​​that can be modified by the user according to his needs. The first 20 programs are associated with the treatment of specific pathologies with pre-set parameters recommended by IACER, while the following 15 only have the pre-established working frequency, leaving the user the freedom to choose the duration and cycles of sessions.

Instructions for use
If you want to use the band, wrap the band around the area to be treated (position it over the area, such as when treating the spine) taking care that the green side of the band is in contact with the skin. Or, if two solenoids are used, they must be placed on the area to be treated (in an opposite manner or simply over the area, as for example in the treatment of the spinal column), taking care that the green side is in contact with the skin.
Tips for correct use:
ò in programs P1-P20, setting an intensity higher than 60, with prolonged therapy times, the 3-solenoid band could heat up making the therapy uncomfortable: it is advisable to divide the treatments and not exceed 2 consecutive hours of therapy;
ò in programs P21-P35 if you want to set an intensity higher than 100 with treatments lasting more than 2 hours we recommend using the pair of professional solenoids available as an optional accessory for MAG2000;
ò with the use of the magnetotherapy mat (optional accessory) for prolonged treatments, it is recommended not to use intensities higher than 50 for all programmes.
If you wish to have a higher field intensity or need to treat a tissue in depth, or even in the presence of a cast or brace, we recommend choosing a pair of professional solenoids (optional accessory) which guarantee high performance and greater intensity of field and tissue penetration.

Connections and switching on
1. Connect the applicator (or applicators) to the appliance, connecting the plug of the applicator cable to one of the two sockets (CH1-CH2) located on the small panel at the top of the appliance;
2. Connect the network cable to the power supply and then connect the power supply socket to the circular connector located on the small panel at the top of the appliance, near the ON/OFF switch.
3. Connect the plug of the mains cable to the power socket (AC 110-230V, 50-60Hz).
4. Move the ON/OFF switch located on the panel at the top to the ON position: the display will show the I-TECH logo and then the program menu screen.

Program selection
1. Inside the sco menu