Description
Personal protective equipment class FFP2 NR category III.
The PPE is used to protect the respiratory tract from drops and non-oily particles, oily particles and dust.
With hooks to make the mask adhere better to small faces.
The mask equipped with an adaptable nose bridge.
Bacterial Filtration Efficiency: ≥95%.
Standard EN 149:2001+A1:2009.

How to use
Open the device using both hands making sure the bridge is on the outside at the top. Place the mask over the nose and mouth, place it under the chin with the nose bridge facing upwards. Bring both straps behind the ears. The device can also be worn using the adapter hook recommended for smaller facial and skull conformations. Insert one of the elastics into the more closed end of the hook and bring the device to the face, hook the other elastic to the more open end of the hook which will be positioned behind the neck. With the use of the fingertips, make the nose piece adhere to the nasal septum by pushing from the outside to the inside. During this phase of testing the mask, the user may experience decreased oxygen flow. Before entering the work area, perform breathing tests to check for leaks or drafts in the mask. Place both hands on the mask and inhale deeply, being careful not to change the position of the mask. If the user experiences negative pressure inside the mask it is normal. If the user feels air leaking around the nose, reposition the mask. If there are no leaks or leaks of oxygen then you can proceed to enter the contaminated area.

Components
Mask in 5 layers:
- 1st layer: non-woven fabric 30 g/m ² ;
- 2nd and 3rd layer: double filtering layer with melt-blown technology 25g/m ² each;
- 4th layer: 25 g/m ² hot air cotton;
- 5th layer: non-woven fabric 50 g/m ² .

Warnings
Disposable: not reusable.

storage
Store the device in a cool place, away from heat sources, open flames, direct sunlight and atmospheric agents.
Validity with intact packaging: 24 months.

Format
Pack of 5 bags of 5 pieces

Code MM-1