Description
Three-layer non-sterile medical mask: breathable outer layer, intermediate layer with high filtering power, resistant and hypoallergenic inner layer.
Equipped with hypoallergenic ear tubular elastics and moldable protective traumatic nose clip.
It does not contain components produced with natural rubber latex.
Color: terrazzo.

How to use
Before putting on the device, make sure your hands are clean.
Separate the upper and lower flaps of the template until a shell shape is obtained. Slightly bend the center of the nose clip. Make sure both sides are fully unfolded.
Grasp the bands with both hands, with the nose clip facing up. Bring the rubber bands behind your ears and gently press the metal clip so that it snaps to your nose.
With both hands, shape the nose clip around the nasal septum to ensure a good fit on the face and a good seal. Pressing the nose clip with a single knob may result in less tightness and less performance of the mask.
Adjust the mask making sure that the chin is covered before entering the contaminated area.

Warnings
Always make sure that the complete product is:
- suitable for the application;
- worn correctly;
- worn for the entire period of exposure;
- replaced when necessary.
Appropriate selection, training in correct use and proper maintenance are essential to obtain the maximum protection of the user from any contaminants present in the air.
Failure to follow the instructions for use of these products for the protection of the respiratory tract and / or not wearing the product correctly for the entire period of exposure can compromise the health of the user and cause serious illnesses, permanent disability.
To verify the suitability and correct use, refer to the national regulations, follow all the indications provided in the instructions for use or contact a person expert in safety at work.
Before use, the user must be trained in the correct use of the complete product in accordance with the applicable Health and Safety regulations / guidelines.
Do not use with beards, mustaches or sideburns which can limit the adherence of the mask to the face and therefore compromise its good seal.
Leave the contaminated area immediately if:
- breathing becomes difficult;
- you feel dizziness or other discomfort.
Discard and replace the mask if it becomes damaged or breathing becomes too difficult.
Do not alter, modify or repair this device in any way.
Do not use in an environment with insufficient oxygen content (<17%).
Do not use when contaminant concentrations are immediately hazardous to health.
Do not use for escape; in areas at risk of explosion, comply with the relevant regulations.
The device must be replaced if damaged, if the breathing resistance becomes excessive or at the end of the work shift.

storage
The product must be stored in a dry, cool and clean place. Store and transport the product in its original packaging.
The expiry date is indicated on the product packaging. Before use, check that the product is still within the declared validity period (expiry date).

Format
Pack of 5 pieces
Size: adult

Code PM001TECE