Description
Three-layer, single-use, non-sterile medical mask.
One size fits all thanks to the elastic bands. Seamless construction with metal nose clip.
Made of biocompatible material.
Medical device, CE marked, Class I type IIR.
Standard EN 14683: 2019.
Color: sunset.

How to use
Before putting on the device, make sure your hands are clean.
Separate the upper and lower edges of the mask until a shell shape is obtained. Slightly bend the center of the nose clip. Make sure that both sides are fully unfolded. Grasp the rubber bands with both hands, with the nose clip facing up. Bring the rubber bands behind your ears and gently press the metal clip so that it snaps to your nose. With both hands, shape the nose clip around the septum to ensure a good fit on the face and a good seal.
Pressing the nose clip with one hand can result in less grip and less mask performance.
Adjust the mask making sure that the chin is covered before entering the contaminated area.

Components
Three layers: breathable outer layer, intermediate layer with high filtering power, resistant and hypoallergenic inner layer.
Equipped with hypoallergenic ear tubular elastics and moldable protective traumatic nose clip.

Warnings
Disposable: do not reuse.
Always make sure that the complete product is: suitable for application, worn correctly, worn throughout the exposure period, replaced when necessary.
Appropriate selection, training in correct use and proper maintenance are essential to obtain the maximum protection of the user from any contaminants present in the air.
Failure to follow the instructions for use relating to the use of these products for the protection of the respiratory tract and / or not wearing the product correctly for the entire period of exposure can compromise the health of the user and cause serious illness.
To verify the adequacy and correct use, refer to the national regulations, follow all the indications provided in the instructions for use or contact a person expert in safety at work.
Before use, the user must be trained in the correct use of the complete product, in accordance with the applicable Health and Safety regulations / guidelines.
It does not contain components produced with natural rubber latex.
Do not use with beards, mustaches or sideburns which may limit the adherence of the mask to the face and therefore compromise its good seal.
Leave the contaminated area immediately if:
- breathing becomes difficult;
- you feel dizziness or other discomfort.
Discard and replace the mask if it becomes damaged or breathing becomes too difficult.
Do not alter, modify or repair the device in any way.
Do not use in an environment with insufficient oxygen content (<17%).
Do not use when contaminant concentrations are immediately hazardous to health.
Do not use for escape; in areas at risk of explosion, comply with the relevant regulations.
The device must be replaced if it is damaged, if the breathing resistance becomes excessive or in any case at the end of the work shift.

storage
Store in a cool, dry and clean place, in the original packaging.
Before use, check that the product is still within the validity period (expiry date). The expiry date is indicated on the product packaging.
Validity for intact packaging: 24 months.

Format
Packaging