Queisser

Protefix

ADHESIVE BEARINGS FOR LOWER AND UPPER PROSTHESIS

Indications:
protects the gums from irritation, blocks the prosthesis for the whole day and fights bad odors in the mouth.The soft cushion increases in volume once wet and eliminates the empty spaces between the prosthesis and the gum eliminating any friction on the mucous membranes preventing lacerations, irritations and Protective and anti-allergic adhesive extracted from marine algae.

How to use:
1) Moisten the pad by immersing it for 10 seconds in lukewarm water.
2) Apply the cushion to the prosthesis, checking its size, smoothing out any folds with your fingers.
3) If necessary, cut out the excess part keeping the bearing in place.
Do not cut the bearing too much. A bearing that is too small is not sufficiently adhesive.
4) Press the pad onto the prosthesis starting from the center with both fingers until it is well supported, smooth and perfectly adherent. Then after a few minutes of pressure, apply it.
5) If adhesiveness decreases during the day, remove the prosthesis and sprinkle the bearing with Protefix powder.
6) At the end of the day, remove the bearing by lifting one side and extracting it.

Cod. PROTEFIX04 / PROTEFIX05