Safety

Spare Set

For Electric Breast Pump

The Set is a medical device suitable for use on all electric breast pumps, which require the use of the external suction cup.

How to use
-Once the set has been disinfected and cleaned, screw the breast cup to the bottle using the ring nut, always checking the presence of the white silicone seal.
-Connect the other end directly to the suction connector of the electric breast pump.
Case A:
If the electric breast pump to which the tube is connected is of the automatic type and I therefore perform a suction cycle in electronic and automatic mode, remember to also insert the shutter cap in the drain hole located above the bottle.
Case B:
If the electric breast pump to which the tube is connected is of the manual type, i.e. the suction cycle is manual because it is activated by the operator using the finger above the drain hole located above the bottle, then the plug must not be used.

Cleaning and maintenance
The medical device is not sterile, therefore, before using it, proceed with cleaning and disinfection.

Format
- Bottle
- Bottle cup screwing ring
-PVC suction tube
- PC breast cup
-Silicone ring gasket
- Shutter cap (to be used only with automatic breast pumps) 2pcs