SENSINITRYL Powder Free Glove L Bericah

Sensintryl Bericah powder free nitrile glove

Medical, examination, disposable, non-sterile gloves made of nitrile, powder free. Single use. In Class I according to Annex IX of Directive 2007/47 / EC, as an invasive device for temporary use in relation to the orifices of the body.
Examination glove, disposable polyvalent non sterile in nitrile. Ambidextrous with tear-saving cuff. Dustless. Micro-rough surface that guarantees maximum sensitivity and optimized grip. Free of natural rubber latex, it eliminates the risk of type I and type IV allergic reactions related to the presence of water-soluble proteins and chemical residues. Resistant to oils and greases in general, petroleum, petrol and various solvents based on alcohol and ketone. High ergonomics that allow prolonged use without fatigue; Made in opaque blue color with anti-visual fatigue color tones. The exceptional elasticity and sensitivity make them an excellent alternative to the traditional latex glove.

Use

Examination, exploration, therapy, diagnostics. Research Laboratories. Chemical and pharmaceutical industry. Mechanical workshops and body shops. Food processing.

Components

Nitrile (Nipol LX550L NBR); sulfur (S); zinc oxide (ZnO); titanium oxide (TiO2), pigment antifoam agents; antiager / antioxidant; potassium hydroxide (KOH).

Biocompatibility

Primary Irritation Test on Rabbits (ISO 10993-10) with non-irritating result Skin Sensitization Test on Guinea pigs (ISO 10993-10) with negative result.

Viral Penetration

Result extrapolated from the test report according to ASTM F 1671: “3 samples were tested. The 3 samples passed the test. No viral penetration was observed ".

AQL for microholes

AQL 1.5 for inspection according to UNI EN 455 Part 1 and Sampling Plan according to ISO 2859 (General Inspection Level G1).
AQL <1.5 for inspection according to UNI EN 374 Part 2 and Sampling Plan according to ISO 2859 (General Inspection Level G1).

AQL for visible defects

AQL 2.5 for major defects - AQL 4.0 for minor defects Sampling plan ISO2859 inspection level G1.

AQL by size

AQL 4.0 Sampling plan ISO 2859 inspection level S-2.

Chemical additive residues

TMTD, MBT, ZMBT, ZDEC, ZDMC, ZPMC, ZDBC, BHT, BHA: absent or below the detectability threshold.

Conservation - Disposal

Five years from the date of manufacture.
The device, at the end of its use, must be treated according to the current regulations on the subject according to the field of application in which it was used.

Warnings

The glove must be put on before the start of operational activity. The choice of the glove must be made knowing the working activity and the working process performed by the operator, taking into account the working conditions and related risks. Disposable glove to be used inactivity chemically and mechanically non aggressive; traceability; Keep the gloves in their original packaging in a cool and dry place. Avoid direct exposure to sunlight, ozone and heat sources; Always carry out a preliminary test in the real conditions of use; Do not use gloves in contact with the chemical product tested for periods longer than those relating to the level of performance (0 < 10 min; 1> 10 min.; 2> 30 min.; 3> 60 min.; 4> 120 min.; 5> 240 min.; 6> 480 min.; Wear gloves with dry hands.

Format

Pack of 100 gloves size L (Large).