-
-15%
-
Vitapep pressure gauge + Fitting + Hose
- Brand: AIR LIQUIDE MEDICAL SYST. Srl
- Product Code: 978270736
- EAN: 8015662720526
- Availability: In Stock
- Purchase 3 items for 111.35€ each
- Purchase 4 items for 109.08€ each
- Purchase 5 items for 106.80€ each
Vitapep Manometer Kit + Fitting + Hose - Medical Device
The pressure gauge kit for Vitapep with connection is used to measure the effort to be made during respiratory gymnastics performed with Vitapep. The positive pressure generated by the patient is measured by the manometer thus allowing the physician to carry out an appropriate sizing. The fitting is used to connect the tube, connected to the pressure gauge, to the Vitapep.
The pressure gauge shows the graduated scale divided into hPa (1 hPa is equivalent to about 1 cm H2O) ranging from 0 to 60 hPa.
Composition
Pressure gauge: steel.
Tube: non-toxic PVC.
Technical features
| Operating conditions | |
| Temperature | Min + 10 ° C Max + 40 ° C |
| Relative humidity | Min 30% Max 75% |
| Pressure | Min 700 hPa Max 1,060 hPa |
How to use
The pressure gauge can be cleaned using any detergent product as long as it is not corrosive.
The tube can be washed with hot water using a little non-abrasive detergent and rinsed under running water. Before being stored, the tube must be dried on the outside and left to drain until the internal part is dry.
The tube can be immersed in a cold disinfectant solution (such as a 2% sodium hypochlorite solution), following the instructions given by the manufacturer.
Format
The pressure gauge kit for Vitapep with fitting consists of:
- gauge;
- connection tube;
- fitting 15 M / 22 M / 5 F.